JAGUAR vehicles obd1 code retrieval
For Jaguar
vehicles with obd1 codes (made before 1995 or 1993), testing the check engine
lights in your dash to get the code is simple. All you do is locate the Vehicle
Condition Monitor (VCM) button in the dash panel sitting below the tachometer
and speedometer. The procedure begins by turning the key off and waiting for 5
seconds then turning the ignition key to position 2 without starting the
engine. When you press the VCM button, codes will start to display in your dash
panel.
Clearing
the codes can be done by turning the key off and removing the battery negative
terminal for 30 seconds and reconnect.
Here are
some popular obd1 Jaguar codes:
Code 12
Mass sensor fault
Code 13
Manifold absolute pressure (MAP) sensor fault
Code 14
Engine coolant temperature sensor fault
Code 16 Air
temperature sensor fault
Code 17
Throttle positioner sensor fault
Code 18 and
Code 19 Throttle potentiometer/Mass sensor airflow sensor fault
Code 22 and
Code 44 Heated oxygen sensor/ Fuel pump relay fault
Code 23
Fuel control system fault
Code 24
Ignition amplifier circuit fault
Code 26 Air
leak or vacuum leak causing lean condition
Code 29
Electronic control module fault
Code 33 and
Code 34 Fuel injection circuit fault
Code 37 EGR
solenoid valve fault
Code 39 EGR
system fault
Code 46 and
Code 48 Idle air control valve circuit fault
Code 68
Vehicle speed sensor fault
Code 69
Park/Neutral position switch circuit fault
Code 89 Evaporative canister purge control valve circuit
fault
No comments:
Post a Comment